US EPA Confirms ASTM D6377 as an Alternative Test Method For Measuring Vapor Pressure of Crude Oils
October 2013 – A new method for measuring the True Vapor Pressure (TVP) of crude oils is spreading quickly within the oil and gas industry. At request of the American Petroleum Institute (API), the US Environmental Protection Agency (EPA) recently confirmed the use of the ASTM D6377-10 standard as an alternative test method for the determination of the True Vapor Pressure of high VP crude oils. Widely used by the industry, the new method is now included within the AMETEK Grabner Instruments vapor pressure testers provided by Petrolab Company.
As defined by International Maritime Organization, the True Vapor Pressure (TVP) or bubble point vapor pressure is the equilibrium vapor pressure of a mixture when the vapor/liquid ratio (V/L) is zero. A V/L =0 can be achieved if a container is filled to the top with crude oil. This condition is typical for floating roof tanks, where the roof is floating directly on the crude oil.
As clear as this definition seems, a correct interpretation of the TVP term always depends on the specification for which it is used. In refining, the term TVP often is used to reflect the specific conditions of storage or transport. For example, if a truck or a ship is filled 95% with crude oil and only 5% vapor space remains, the vapor pressure at a V/L = 0.053 may be referred to as TVP. Within US EPA title 40 regulations, the term TVP is used for a TVP estimate calculated from a D323 Reid Vapor Pressure measurement and the crude oil´s tank stock temperature.
In its letter dated May 28, 2013 and published at http://epa.gov/ttn/emc/approalt.html, the US EPA acknowledged the broad use of the ASTM D6377-10 standard for VP measurement of crude oils. It confirmed the use of D6377 as an alternative method for TVP measurement of volatile crude oils, as defined under title 40 CFR with the understanding that crude oil samples are delivered pressurized for measurement to prevent evaporation of light ends and that the TVP is measured at a V/L = 4.
ASTM D6377 method is very versatile. It allows measurement of the TVP at various V/L ratios to reflect different tank filling levels. In addition, Grabner analyzers include a method for Bubble Point determination. Sandia National Laboratories has used this Bubble Point / TVP extrapolation method successfully (see Lord & Rudeen, 2010): From three D6377 measurements at different V/L ratios, the TVP of crude oil at a V/L = 0 is extrapolated. The extrapolation function assumes that crude oil is composed of three components: very light gas components (e.g. methane or nitrogen), intermediate volatility components (e.g. C2 and higher) and a non-volatile fraction (Lord & Rudeen, 2010).
Grabner analyzers have used the TVP extrapolation method successfully around the world. The method was demonstrated on large number of crude oil samples at the US Strategic Petroleum Reserve, and a similar TVP extrapolation project is currently underway at the Canadian Crude Quality Technical Association (CCQTA).
Click here for more information on vapor pressure testers